Specifications Quayside Conservatories
All joinery is constructed from selected "engineered" Red Grandis and non-engineered Meranti hardwoods. These timbers are used for a combination of strength and durability. All timbers are sourced from certified sources of managed forests in compliance with EU Timber Regulation. The timbers are kiln dried to a moisture content of 12-14%. The joinery is spray with a microporous water-borne system to give a high build uniform paint finish in the client’s choice of colourway.
FACE FRAME DESIGNS:
An infinite number and variety of designs and sizes are available (subject only to structural considerations).
Toughened insulated glass units are supplied for every vertical frame section. These units are sealed into the frames using the full perimeter bonded, neutral-cure silicone (wet) glazing method on-site.
Either safety glass (4:16:4 units) or triple wall polycarbonate sheets may be specified for roof glazing. Our own glazing system ensures a leak free roof when properly installed.
All opening windows are of a high-performance specification, conventionally hung on stainless steel hinges, fully draught proofed and fitted with espagneolette multipoint locks. Windows handles are available in Polished Chrome, PVD Gold, Black or White finish.
This may be achieved using thermally broken powdercoated, aluminium roof vents, which can either be manually or electrically operated.
Single or double doors are available with toughened insulated glass units and can open either inward or outward. All door systems are fully weather proofed, fitted with door handles and multipoint security locks.
Translucent versions: 1x base coat stain, 2x top coats (Oak, Afromosia, Chestnut and Walnut shades). Opaque versions: 1x base coat stain, 1x high build primer, 1x top coat (in the colour of choice). Both versions are factory sprayed using microporous cross-linked lacquer to achieve a low maintenance surface.
Full technical support and advice may be called for and will always be provided in an easily understood form.
Normally 6 - 8 weeks from cleared order, however this can fluctuate throughout the year according to demand.
Note: This general specification has been kept brief, please contact our sales office if you require more detailed information.